Maximum quality of the finished product, extremely fast cycles, rapid processing changes and unmatched ease of use. coat 3D shaped panels with thermoformable plastic sheets (PVC, TRANSFER FOIL, etc.) or veneer to produce kitchen or bathroom cupboard doors, drawers, doors, tables, desks, etc.

Dimensions 13800mm（11800mm）×5200mm×2820mm.(Overall occupied space)
Bed dimension 3000mm*(2560mm)*1270mm
Maximum machining height 80mm
Rated working pressure positive pressure≤0.6Mpa negative pressure≥-0.095Mpa
Total power 43Kw
Actual power consumption 18Kw
Total weight 24 T
Voltage Three-phase 380 v

General Introduction

This machine can be used to paste PVC on furniture, cabinets, speakers, relief doors, decoration panels for walls and other abnormal decoration shapes. With a special silicon sheet, it can also work with hot transfer and veneer.

TM-2580F Vacuum Upper Pressure Membrane Machine specification

Features
1. Fast speed: the working period of ordinary workpiece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment.
2. Good effect: the product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level.
3. Low energy consumption: the total power of the machine is 18KW, which is one half of that of the peer equipment; The main heating starting power is 15KW, and the average power consumption is 8KW/h.
4. High configuration: the key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance.

It is used to work various high-profile PVC, hot transfer and single veneer
All kinds of PVC workpieces processed by this machine stick firmly, do not bounce off the edge.Line of groove is clear and in place.

Maximum quality of the finished product, extremely fast cycles, rapid processing changes and unmatched ease of use. coat 3D shaped panels with thermoformable plastic sheets (PVC, TRANSFER FOIL, etc.) or veneer to produce kitchen or bathroom cupboard doors, drawers, doors, tables, desks, etc.