TM2480A Pvc Foil Negative Vacuum Membrane Press Machine
Product Description
TM2480A pvc foil vacuum membrane press machine
Function
Various PVC film can be pasted on furniture, cabinets, acoustics, process doors, decoration wallboard, etc., and can be used for heat transfer film and veneer after the installation of silicone plate.
Features
The machine is operated manually, the heating chamber is not moving, the work table pushes in and out!
The vacuum control USES the electric contact vacuum gauge and automatically controls the vacuum pressure.The microcomputer temperature controller can automatically search the temperature change speed and adjust the heating speed to control the temperature accurately.
The machine is standard equipped with domestic top 2X series vacuum pumps, with good stability and easy maintenance.(can be equipped with vacuum pump imported from Germany with strong power and low failure rate.)
Note:
1. This machine can be configured with highlight function.
2. This machine can select imported pump
Technical parameter
Dimensions | 9860 (6400) mm×1700mm×1430mm |
B ed dimension | 2550mm x1100(1300)mm |
Rated working pressure | negative pressure ≥-0.095Mpa |
Total power | 15KW |
Actual power consumption | About 5KW |
Total weight | 2T |
Upgrade improvements
u The walking guide is made in Taiwan, and the workbench walks more smoothly.
u The racks are all sandblasted to enhance corrosion resistance.
u The lifting balance system is easy to adjust, and the rise and fall are more stable.
u Hydraulic system oil port improvement and maintenance is more convenient.
u The aluminum frame is processed by one body, and no weld seam increases the strength.