Views: 1 Author: Site Editor Publish Time: 2022-10-19 Origin: Site
Furniture products have always been the most indispensable daily necessities in consumers' daily life. With the progress of the times and the change of people's aesthetic concepts, the appearance coating process of furniture products has gradually become the most important thing for consumers when purchasing furniture. One of the main shopping items to watch. In order to improve the overall appearance quality of furniture products, in addition to using manual brushing methods to paint multi-color paints for the appearance of furniture, the airless sprayer can also atomize the paint and spray it evenly on the surface of the furniture. In addition to spraying furniture with airless spraying equipment, if electrostatic powder spraying equipment is used to spray the surface of furniture, the surface of furniture can have some special properties that cannot be obtained after spraying with airless spraying equipment.
Before we spray furniture products or other products with electrostatic powder spraying machine, we need to conduct sufficient pretreatment on the surfaces of these sprayed parts. Among them, if it is the surface of old furniture, we need to degrease the surface of the old furniture; if it is a metal workpiece, we need to rust and phosphatize the surface of these workpieces. Secondly, it is necessary to scrape the defective parts below the surface of the product for putty.
The staff needs to apply a layer of scraping conductive putty to the surface of the product according to the degree of surface defects of the product. After the scraped conductive putty is dry, the putty can be smoothed with sandpaper. So that we can improve the coating quality of the product surface according to the correct spraying process when we use the electrostatic powder spraying machine to carry out the powder electrostatic spraying process on the product.
In the process of powder electrostatic spraying process, the last work flow is to cure the coating on the surface of the product after we complete the spraying operation of the electrostatic powder spraying machine. At the same time, after the coating is dried, the burrs existing on the surface of the coating need to be smoothed in the later stage. Of course, it is not only the spraying operation of the electrostatic powder spraying machine, but also the need for these technological processes. When the airless spraying machine sprays the product, it is also necessary to check the overall quality of the product.