The structure of the panel doorThe panel door is generally a framed panel component, which can be divided into the following parts:1. The door stands.2. On the head.3. Under the head.4. Door core board.

1 Determine whether it is water or oil2. There is a radiator (sheet) where the connection is made, whether the radiator interface leaks oil, and there is an interface in the pump, whether the interface leaks oil.3 There is a circulating hot oil pipe in the place of the vacuum pump. The pipe is used

Glue spray: The diameter of the glue gun is 1.5-2.0mm; when spraying glue on the facade, the amount of glue around and groove is appropriately increased.Drying glue: Generally, it is advisable not to stick to hands.When TM3000 is used as a highlight, the heating time in the working chamber should no

Comparison of oil heating and electric heatingOil heating features:1、(advantage) less heat loss, thermal slow2、Oil heating tools have lower value but it cost more of follow up operation3、(disadvantages) cooling slow while heat dissipation is slow, heating takes longer to reach the required temperatu