The whole operational process of vacuum membrane press machine
You are here: Home » News » Technology » The whole operational process of vacuum membrane press machine

The whole operational process of vacuum membrane press machine

Views:4     Author:Site Editor     Publish Time: 2020-05-18      Origin:Site

Vacuum laminator (vacuum membrane press machine) is a device that generates, improves and / or maintains vacuum, vacuum application equipment and vacuum acquisition equipment. It is also a vacuum treatment of products to improve product processing (production) equipment.




2580F_meitu_1



How much do you know about the operation rules of the vacuum laminator? The following will give you a systematic introduction.


  1. Check whether the pressing device and the rotating parts are in good condition before going to work.

  2. Clean up dust and scum in the workbench.

  3. Prepare necessary product pads (6-8 mm smaller than the workpiece) and other necessary materials.

  4. Check and adjust temperature and schedule settings according to film thickness.

  5. When processing multiple pieces together, arrange the appropriate distance according to the thickness of the processed board (generally 3-4 times the thickness of the board).

  6. Before moving the heating hood, check whether the clamping frame is locked, whether there are objects and personnel hands on and around the rail.

  7. During the working process of the machine, it is strictly forbidden to stand around the machine, let alone put it on the guide rail and equipment, to prevent the machine from automatically returning to the heating hood and hurting people.

  8. It is strictly forbidden to place products and other objects on the heating hood.

  9. When the machine is found to work abnormally, it should be turned off immediately, and the supervisor should be notified.

  10. Do not disassemble protective articles such as safety covers at will.

  11. Operators must not leave the machine during work.

  12. Turn off the power when the work is finished.



We should always check the rubber roller of the vertical laminator for adhesion of rubber skin and grease, and wipe the rubber traces and dust on the roller in time. Ensure that the surfaces of the two rolls are clean and bright. The surface of each roller must be kept strictly clean. After each use of the machine, be sure to clean the machine immediately. Wash with glue thinner (alcohol or xylene) and scrub the rollers with a soft towel. It is strictly forbidden to scrape the surface of the roller with a sharp tool. Every time the machine is turned on, the dust on the surface of each roller should be wiped off. And check whether the surface of each roller of the machine is smooth, the machine has a malfunction or abnormal sound, it should be stopped immediately, and the cause of the analysis should be found and eliminated in time. After the standby device is normal, the machine can be used continuously.


Lubricating oil should be added to the transmission parts and sliding surfaces of the machine regularly to ensure that the machine is in a good lubrication state. In particular, the large bearing of the pressure roller is subject to high pressure and high temperature, and the lubricating oil is easily volatile. It should be injected with high-temperature lubricating oil in time to make it work normally under high temperature and high pressure. A comprehensive inspection of the machine is carried out every year, and the problems are solved in a timely manner.


For more questions about the vacuum laminator, please feel free to call us.

Please feel free to contact us with any questions, concerns, comments, or recommendations !
SHENYANG ZHANHONGTU MACHINERY EQUIPMENT

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

    Add : Srecial vehicle base Industrial part Liao ning Province
    Phone : +86-13166797961
    E-mail : info@zhtmac.com

Copyright  2018  Shenyang Zhanhongtu Machinery Equipment Co.,Ltd. 
Sitemap