Technology

• The differences between models of positive & negative and ones of negative

  The mechnical principle

  Technology February 13, 2020
• How to solve after-sales problems of laminating machine ?

  How to solve after-sales problems

  Technology June 24, 2020
• The whole operational process of vacuum membrane press machine

  Vacuum laminator (vacuum membrane press machine) is a device that generates, improves and / or maintains vacuum, vacuum application equipment and vacuum acquisition equipment. It is also a vacuum treatment of products to improve product processing (production) equipment.

  Technology May 18, 2020
• Features of vacuum membrane press machine

  Features of vacuum membrane press machine

  Technology June 10, 2020
• Introduction of coating materials and repair and maintenance of coating machine

  Coating material of coating machine

  Technology June 01, 2020
• The differences between only vacuum membrane press machine and positive and negative press machine

  the differences between them are the worktable size , if your product is wardrobe door and closet door , maybe 3000MM long worktable is suitable for youthese machines can press special cabinet doors ,such as free handle door , and high gloss pvc foiland products made by TM3000F is much better than T

  Technology May 26, 2020
• The differences between TM3000 and other manufacturer`s

  The differences between TM3000 and other manufacturer`s

  Technology May 11, 2020
• Failure analysis and elimination of vacuum membrane press machine

  Failure analysis and elimination of vacuum membrane press machine One. Power distribution cabinet does not work1. Poor power supply contact: check the corresponding wires, terminals. And reinforce them.2. Leakage switch trip: Whether there is leakage in other parts.3. Fuse blown: Find out the cause

  Technology April 27, 2020
• How to deal with issues during the process of operation

  When operating a mechanical device, the vacuum suction machine needs to have certain professional knowledge and relevant job safety knowledge.

  Technology April 21, 2020
• Brief Introductions of MDF (medium density fiberboard) material and its characteristics

  MDF (medium density fiberboard) is made of plant fiber, with urea-formaldehyde resin or other synthetic resin, pressed under heating and pressure conditions, the density of 0.50 ~ 0.88g / cm3 plate can also Add other suitable additives to improve sheet properties.

  Technology April 07, 2020