Technology

• Differences Between Positive and Negative Pressure Laminating Machines

  PVC lamination machines are mainly divided into ordinary negative pressure machines and positive and negative pressure machines, which differ greatly in working principle, structural design, working pressure and product processing adaptability, directly affecting lamination flatness, fitting tightness and finished product quality. This article systematically compares the core differences between the two types of equipment, elaborates their structural advantages, working performance and applicable scenarios, and explains the key technical indicators for judging equipment quality, providing professional reference for woodworking lamination equipment selection.

  Technology August 21, 2026
• Vacuum Forming Adhesive And Curing Agent Mixing Ratio Requirements

  Technology August 03, 2026
• Difference between Gravity-sensor Pin System And Laser Scan Pin System

  Technology July 22, 2026
• Differences between HPL And PVC Materials in Furniture Vacuum Forming

  HPL (High Pressure Decorative Fire-Resistant Board) material is usually hard and cannot be directly thermoformed like traditional PVC film using "paper vacuum forming". The related processes can generally be divided into two categories: HPL flat lamination, or "film pressing/wrapping" which is simil

  Technology July 01, 2026
• What Are The Characteristics of The ZHT Laser Scanning Pin System?

  ZHT has launched a new generation of laser scanning pin system with independent intellectual property rights, which has attracted the attention of furniture industry customers worldwide. So, what are the features of ZHT's independently developed laser scanning pin system that have attracted so much

  Technology May 06, 2026
• The Difference between EVA Glue And PUR Glue

  EVA edge banding refers to EVA adhesive, which is synthesized from ethylene (E) and vinyl acetate (VA). It is currently the most affordable and widely used edge banding method, and can be applied with ordinary edge banding machines. EVA adhesive looks like a bean. During the application process, it

  Technology April 14, 2026
• Advantages of ZHT TM3000F PIN System

  1. PIN system structure :We are a high-tech enterprise with the only exclusive patent in the vacuum membrane press machine industry in China. Mechanical structure, the cost of repair is low. Our machine no need scan first , you just place products on the worktable directly , high working efficiency

  Technology July 10, 2024
• Common Problems And Solutions During The Vacuum Blister Lamination Process of PVC Decorative Film

  What are vacuum forming and lamination?When PVC decorative film is heated and softened with spray-coated MDF, a vacuum is used to extract air from between the MDF adhesive film and the PVC decorative layer.During this process, atmospheric pressure is primarily used to adhere the PVC film to the MDF

  Technology September 01, 2025
• Do You Know The Difference between Oil Heating And Electric Heating?

  Firstly, Let’s understand what is oil heating Oil heating:General the number of heating tubes are 9-12Take 12 heating tubes as an example.Heating plate 1540mm,The interval between the two tubes is about 12cm.When the temperature reaches 120 °C, there is no thermal compensation at the center point.

  Technology May 28, 2024
• The Difference Between Negative Pressure Machine And Positive And Negative Pressure Machine

  Due to the lack of flatness and hardness of the thinner pvc film, the thinner pvc film will stick to the surface of the product soon under heating, and it is easy to produce a folding effect. 3 If you use narrow pvc film, that

  Technology May 10, 2024