PVC vacuum press machine
You are here: Home » Products » Automatic Press Machine with Pin System » PVC vacuum press machine

Product Detail

loading

Share to:
sharethis sharing button

PVC vacuum press machine

Dimensions 12200mm×2480mm×2150mm
Bed dimension 3000mm×1270mm
Maximum machining height 50mm
Rated working pressure positive pressure≤0.6Mpa negative pressure≥-0.095Mpa
Total power 35Kw
Actual power consumption 12Kw (Save energy consumption more than 2 times)
Total weight 19T
Voltage Three-phase 380v 50HZ
Availability:
Quantity:
  • TM3000F-P

  • ZHT

PVC vacuum press machine



Feature:

1. Fast speed:

The working period of both ordinary workpiece and highlight workpiece is less than 2 minutes after it enters the main machine, 

which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment.

2. Good effect:

The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, 

and the effect reaches the international leading level.

3. Low energy consumption:

The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h.

4. High configuration:

The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance.

5. High working efficiency:

The whole machine adopts automatic top block. Compared with other domestic manufacturers, it saves the technological process of making the pad, 

saves the cost of process raw materials. The technology can be applied to different manufacturers and different positive and negative pressure devices, 

which saves the cost of replacing equipment. saves the scanning sequence of the pad of the equipment, saves the time of laminating process, 

greatly improves the working efficiency and reduces the labor cost.

Only requires 3 worker, one trimming, one swinging board, and one placing panel.

6.High productivity: standard operation 330-380 square / day, non-standard operation 210-250 square / day.



1566123968680


1566123968731


Technical parameter

Dimensions  

12200mm×2480mm×2150mm

Maximum machining height    

50mm

Rated working pressure   

positive pressure≤0.6Mpa negative pressure≥-0.095Mpa

Total power   

35Kw

Actual power consumption  

12Kw (Save energy consumption more than 2 times)

Total weight             

19T

Voltage 

Three-phase 380v 50HZ

 

Hardware Configuration

Frame

whole steel plate

Number of cylinders

8

Cylinder diameter

180mm

Cylinder structure

solid

Cylinder stroke

200mm

Hydraulic system

Taiwan

Heating system

Electric heating (nanotechnology)

Vacuum pump (import)

SV100

Relay (import)

Schneider

 


Equipment maintenance

every 3-6 months, the vacuum pump changes oil once, and the filter is cleaned every 15 working days;


How it works

This machine adopts human-computer interface, easy to understand and operate, automatic double-station machine

  •  Workbench rise up 

  •  Add hydraulic pressure

  •  Warming

  •  Vacuum negative pressure

  •  Punch positive pressure

  •  Unloading positive pressure

  •  Unloading negative pressure

  •  Unloading hydraulic

  •  Workbench descend 

  •  Flipped board sucking sample up

  This process is automatically completed by one-click!


Silicone plate life

The silicone plate is imported from Korea and can be used for 3-4 months (about 1000 hours) and can be repaired. (This accessory is not covered by the warranty)



Warranty

1. In order to ensure that the demander can use the equipment normally, the warranty period is one year, except for consumables (pressure buckle, gas strut). The supplier will provide free warranty service during the warranty period, non warranty period provide free consultation and troubleshooting for repair, maintenance. The warranty period is calculated from the day when the equipment is shipped.

2. The warranty does not include: damage caused by man-made and natural disasters. (such as fire, flood, earthquake)

3. If the equipment occurs error, The supplier shall provide free qualified parts and maintenance during the warranty period; outside the warranty period, the supplier shall provide the demand at a preferential price for a long time. The cost incurred by the supplier for maintenance shall be settled by both parties through negotiation

4. The supplier shall send technicians to the demander to install and debug the equipment, and train the demander's personnel in practical operation, processing and maintenance  

梁旭名片

       


Quality and Service are most important things for us

                        If you have any problem,please let us know




Previous: 
Next: 

PRODUCT CATEGORY

CONTACT US

Add : No.1 Qianjin Road, Yaopu Town, Tieling County,Tieling City,Liaoning Province,China
Whatsapp:+8613166797961
E-mail : info@zhtmac.com
Please feel free to contact us with any questions, concerns, comments, or recommendations !
LIAONING ZHANHONGTU MACHINERY EQUIPMENT

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

   Add : No.1 Qianjin Road, Yaopu            Town, Tieling County,Tieling                  City,Liaoning Province,China
    Whatsapp : +86-15840529588
    E-mail : info@zhtmac.com

Copyright  2018  Shenyang Zhanhongtu Machinery Equipment Co.,Ltd. 
Sitemap